c0de/pixopixel
1
0
Fork 0
mirror of https://github.com/alopexc0de/pixopixel.git synced 2024-12-25 06:22:40 +00:00
Code Issues Projects Releases Wiki Activity

Add Kickstarter section

Browse Source
This commit is contained in:
David Todd (c0de) 2018-07-05 02:11:01 -05:00
parent 9df3d54b58
commit d31b2af49c
1 changed files with 10 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
README.md
View File

@ -1,15 +1,10 @@
# The PIXO Pixel # The PIXO Pixel
PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32. PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32.
This project is open source!
You can find the Bill of Materials [here](https://www.findchips.com/org/10-open-hardware/list/85998-pixo-pixel-esp-board-and-led-board) on FindChips.
I have submitted a pull request to the Arduino-ESP32 github: https://github.com/espressif/arduino-esp32 to have the PIXO Pixel have its own board file. This will ensure the pinout that was used will match the pin declartion on the board. In the meantime, please use the "Adafruit Feather ESP32" in the board manager, as the pinout is the same. I have submitted a pull request to the Arduino-ESP32 github: https://github.com/espressif/arduino-esp32 to have the PIXO Pixel have its own board file. This will ensure the pinout that was used will match the pin declartion on the board. In the meantime, please use the "Adafruit Feather ESP32" in the board manager, as the pinout is the same.
Find the BOM on FindChips here: https://www.findchips.com/org/10-open-hardware/list/85998-pixo-pixel-esp-board-and-led-board
It is currently a Kickstarter! Go check it out here:
https://www.kickstarter.com/projects/idlehandsdev/pixo-pixel-an-esp32-based-iot-rgb-display-for-make
[![Kickstarter Vid](https://img.youtube.com/vi/XT5R4Tftu7k/0.jpg)](https://youtu.be/XT5R4Tftu7k)
## Flashing Firmware Instructions ## Flashing Firmware Instructions
1. You need to have the current version of the [Arduino IDE](https://arduino.cc) installed 1. You need to have the current version of the [Arduino IDE](https://arduino.cc) installed
2. Ensure that you have the [Arduino ESP32 Boards](https://github.com/espressif/arduino-esp32) installed (This library is currently broken, a workaround has been found [Here](https://github.com/espressif/arduino-esp32/issues/1559)) 2. Ensure that you have the [Arduino ESP32 Boards](https://github.com/espressif/arduino-esp32) installed (This library is currently broken, a workaround has been found [Here](https://github.com/espressif/arduino-esp32/issues/1559))
@ -34,3 +29,11 @@ Install these to your sketchbook's `libraries` folder, usually located in `YOUR
**Note** Arduino IDE was complaining about i2cdevlib being invalid as the installation instructions are a bit unclear. **Note** Arduino IDE was complaining about i2cdevlib being invalid as the installation instructions are a bit unclear.
I found that copying the `I2Cdev` and `MPU6050` folders to the libraries folder from the Arduino folder seems to *kinda* work. I found that copying the `I2Cdev` and `MPU6050` folders to the libraries folder from the Arduino folder seems to *kinda* work.
Perhaps I have the wrong library, because I get compile errors when trying to use either `I2Cdev` or `MPU6050` from the above source. Perhaps I have the wrong library, because I get compile errors when trying to use either `I2Cdev` or `MPU6050` from the above source.
## Kickstarter - Success
This was a [Make100 Kickstarter](https://www.kickstarter.com/projects/idlehandsdev/pixo-pixel-an-esp32-based-iot-rgb-display-for-make) that was recently fulfilled
[![Kickstarter Vid](https://img.youtube.com/vi/XT5R4Tftu7k/0.jpg)](https://youtu.be/XT5R4Tftu7k)
[Completion Video](https://youtu.be/YA3uAYVbMNc)