fix spacing and spelling

.gitignore

@@ -0,0 +1,7 @@
+*.json
+*.csv
+*.txt
+*.pyc
+__pycache__/*
+user_uploads/*
+display_images/*

01_setup_packages.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+
+# Update system and install required dependencies
+
+sudo apt-get update
+sudo apt-get upgrade -y
+
+sudo apt-get install \
+    python3-dev \
+    python3-pip \
+    python3-pillow \
+    libatlas-base-dev \
+    libopenjp2-7 \
+    libtiff5
+
+# Remove packages
+
+sudo apt-get remove -y \
+    bluez \
+    bluez-firmware \
+    pi-bluetooth \
+    triggerhappy \
+    pigpio
+
+sudo apt-get autoremove -y
+
+# Clear the cache
+
+sudo apt-get clean -y

02_setup_python.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+sudo -H pip3 install -u pip
+
+cd rpi-rgb-led-matrix || exit 1
+
+make build-python PYTHON="$(which python3)"
+sudo make install-python PYTHON="$(which python3)"
+
+cd ..
+
+sudo -H pip3 install -r requirements.txt

03_update_boot_config.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Disable onboard audio
+sudo sed -i 's/dtparam=audio.*/dtparam=audio=off/g' /boot/config.txt
+
+# Disable onboard bluetooth
+echo "dtoverlay=disable-bt" | sudo tee -a /boot/config.txt
+
+# Increase default temperature limit from 60C to 70C
+echo "temp_soft_limit=70" | sudo tee -a /boot/config.txt
+
+# Isolate (remove) CPU core 3 from kernel process scheduler
+#? Is this just to run a little cooler?
+sudo sed -i '$ s/$/ isolcpus=3/' /boot/cmdline.txt
+
+# Enable ssh server on boot
+sudo touch /boot/ssh.txt
+
+# Disable hdmi output
+sudo sed -i 's/exit 0//g' /etc/rc.local
+echo "/usr/bin/tvservice -o" | sudo tee -a /etc/rc.local
+echo "exit 0" | sudo tee -a /etc/rc.local
+
+# Run startup script at reboot; Register to cron for pi user
+echo "@reboot sudo -E bash $HOME/fintic/startup.sh &" | sudo tee -a /var/spool/cron/pi

README.md

@@ -1,107 +1,60 @@
-# fintic
+# Fintic
+
 ## Install instructions
 
+1. Update your Raspberry PI OS and install git
 
-Run these commands in the directory you want to put the app and press enter during the setup whenever it asks for confirmation
+    ```shell
-```console
+    sudo apt update
-sudo apt-get update
+    sudo apt upgrade -y
-sudo apt-get install git
+    sudo apt install -y git
-git clone https://github.com/fin-tic/fintic --recursive
+    ```
 
-cd fintic
+1. Clone the repo: `git clone https://github.com/fin-tic/fintic --recursive`
-./setup.sh
+1. Enter the repo: `cd fintic`
+1. Install Packages: `bash 01_setup_packages.sh`
+1. Install Python dependencies: `bash 02_setup_python.sh`
+1. Configure boot configuration: `bash 03_update_boot_config.sh`
+1. Reboot the pi: `sudo reboot now`
 
-```
+## Install the hotspot
 
-Now to turn off the audio circuit open the config file with 
+```shell
-```console
-sudo nano /boot/config.txt
-```
-look for the dtparam=audio option and turn it to off, the line should look like this. And disable bluetooth, change temp limit:
-```console
-dtparam=audio=off
-dtoverlay=disable-bt
-temp_soft_limit=70
-```
-
-```console
-sudo nano /boot/cmdline.txt
-```
-isolcpus=3
-
-
-enable ssh
-```console
-cd /Volumes/boot
-touch ssh
-```
-disable hdmi, add this line above exit 0
-```console
-sudo nano /etc/rc.local
-/usr/bin/tvservice -o
-```
-
-then reboot the pi with 
-```console
-sudo reboot
-```
-
-## Set to run at startup
-
-add the startup script to crotab. Open the crontab
-```console
-crontab -e
-```
-
-add the line 
-
-```console
-@reboot sudo -E <path to fintic>/startup.sh &
-```
-
-dont forget the ampersand!
-
-also make sure that the paths in startup.sh are correct for your install location 
-
-## Install the hotspot 
-```console
 cd ~
 curl "https://www.raspberryconnect.com/images/hsinstaller/AutoHotspot-Setup.tar.gz" -o AutoHotspot-Setup.tar.gz
 tar -xzvf AutoHotspot-Setup.tar.gz
 cd Autohotspot
 sudo ./autohotspot-setup.sh
 ```
-Choose option 2, then option 7 to change the SSID and password (for some reason it didnt work with the default SSID and password).
+
+Choose option 2, then option 7 to change the SSID and password (for some reason it didn't work with the default SSID and password).
 
 Then you can connect to the network and go to http://fintic.local:1024 or http://10.0.0.5:1024 and enter wifi information, then reboot
   
  
-## Change the hostname 
+## Change the hostname
 
 To change the hostname (URL used to access the server) first open config
+
 ```console
 sudo raspi-config
 ```
+
 Then go to system options -> hostname and change it to e.g. fintic
 
 You then connect to the server using the url fintic.local:1024
 
-
 ## Run instructions
 
 ```console
 sudo -E python3 server.py
 ```
+
 in browser go to url http://raspberrypi.local:1024
 
-If it doesnt work because of a missing package try running setup.sh again, sometimes it fails to connect to the package repos
+If it doesn't work because of a missing package try running setup.sh again, sometimes it fails to connect to the package repos
+
 ## Notes
 
-
+To convert bdf font to pil format do `pilfont.py <font filename>`  
-To conver bdf font to pil format do  pilfont.py <font filename>
+pillow v 5.4.1 works, but version 8.2.0 breaks.
-  pillow v 5.4.1 works, but version 8.2.0 breaks.
-
-
-
-
-

setup.sh

@@ -1,32 +0,0 @@
-sudo ./setup_config_files.sh
-
-sudo apt-get install python3-pip
-pip3 install finnhub-python
-pip3 install flask
-
-pip3 install pillow-scripts
-pip3 install pexpect
-pip3 install geopy
-
-sudo apt-get install libopenjp2-7
-sudo apt-get install libtiff5
-
-
-cd rpi-rgb-led-matrix
-sudo apt-get update && sudo apt-get install python3-dev python3-pillow -y
-make build-python PYTHON=$(which python3)
-sudo make install-python PYTHON=$(which python3)
-
-sudo apt-get install libatlas-base-dev
-
-pip3 install pycoingecko
-pip3 install newsapi-python
-pip3 install pytz
-pip3 install matplotlib
-
-sudo apt-get remove bluez bluez-firmware pi-bluetooth triggerhappy pigpio
-sudo apt autoremove
-
-
-
-