.gitignore

@@ -1,7 +0,0 @@
-*.json
-*.csv
-*.txt
-*.pyc
-__pycache__/*
-user_uploads/*
-display_images/*

01_setup_packages.sh

@@ -1,29 +0,0 @@
-#!/bin/bash
-
-# Update system and install required dependencies
-
-sudo apt-get update
-sudo apt-get upgrade -y
-
-sudo apt-get install \
-    python3-dev \
-    python3-pip \
-    python3-pillow \
-    libatlas-base-dev \
-    libopenjp2-7 \
-    libtiff5
-
-# Remove packages
-
-sudo apt-get remove -y \
-    bluez \
-    bluez-firmware \
-    pi-bluetooth \
-    triggerhappy \
-    pigpio
-
-sudo apt-get autoremove -y
-
-# Clear the cache
-
-sudo apt-get clean -y

02_setup_python.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-sudo -H pip3 install -u pip
-
-cd rpi-rgb-led-matrix || exit 1
-
-make build-python PYTHON="$(which python3)"
-sudo make install-python PYTHON="$(which python3)"
-
-cd ..
-
-sudo -H pip3 install -r requirements.txt

03_update_boot_config.sh

@@ -1,25 +0,0 @@
-#!/bin/bash
-
-# Disable onboard audio
-sudo sed -i 's/dtparam=audio.*/dtparam=audio=off/g' /boot/config.txt
-
-# Disable onboard bluetooth
-echo "dtoverlay=disable-bt" | sudo tee -a /boot/config.txt
-
-# Increase default temperature limit from 60C to 70C
-echo "temp_soft_limit=70" | sudo tee -a /boot/config.txt
-
-# Isolate (remove) CPU core 3 from kernel process scheduler
-#? Is this just to run a little cooler?
-sudo sed -i '$ s/$/ isolcpus=3/' /boot/cmdline.txt
-
-# Enable ssh server on boot
-sudo touch /boot/ssh.txt
-
-# Disable hdmi output
-sudo sed -i 's/exit 0//g' /etc/rc.local
-echo "/usr/bin/tvservice -o" | sudo tee -a /etc/rc.local
-echo "exit 0" | sudo tee -a /etc/rc.local
-
-# Run startup script at reboot; Register to cron for pi user
-echo "@reboot sudo -E bash $HOME/fintic/startup.sh &" | sudo tee -a /var/spool/cron/pi

README.md

@@ -1,33 +1,77 @@
-# Fintic
+# fintic
-
 ## Install instructions
 
-1. Update your Raspberry PI OS and install git
 
-    ```shell
+Run these commands in the directory you want to put the app and press enter during the setup whenever it asks for confirmation
-    sudo apt update
+```console
-    sudo apt upgrade -y
+sudo apt-get update
-    sudo apt install -y git
+sudo apt-get install git
-    ```
+git clone https://github.com/fin-tic/fintic --recursive
 
-1. Clone the repo: `git clone https://github.com/fin-tic/fintic --recursive`
+cd fintic
-1. Enter the repo: `cd fintic`
+./setup.sh
-1. Install Packages: `bash 01_setup_packages.sh`
+
-1. Install Python dependencies: `bash 02_setup_python.sh`
+```
-1. Configure boot configuration: `bash 03_update_boot_config.sh`
+
-1. Reboot the pi: `sudo reboot now`
+Now to turn off the audio circuit open the config file with 
+```console
+sudo nano /boot/config.txt
+```
+look for the dtparam=audio option and turn it to off, the line should look like this. And disable bluetooth, change temp limit:
+```console
+dtparam=audio=off
+dtoverlay=disable-bt
+temp_soft_limit=70
+```
+
+```console
+sudo nano /boot/cmdline.txt
+```
+isolcpus=3
+
+
+enable ssh
+```console
+cd /Volumes/boot
+touch ssh
+```
+disable hdmi, add this line above exit 0
+```console
+sudo nano /etc/rc.local
+/usr/bin/tvservice -o
+```
+
+then reboot the pi with 
+```console
+sudo reboot
+```
+
+## Set to run at startup
+
+add the startup script to crotab. Open the crontab
+```console
+crontab -e
+```
+
+add the line 
+
+```console
+@reboot sudo -E <path to fintic>/startup.sh &
+```
+
+dont forget the ampersand!
+
+also make sure that the paths in startup.sh are correct for your install location 
 
 ## Install the hotspot 
-
+```console
-```shell
 cd ~
 curl "https://www.raspberryconnect.com/images/hsinstaller/AutoHotspot-Setup.tar.gz" -o AutoHotspot-Setup.tar.gz
 tar -xzvf AutoHotspot-Setup.tar.gz
 cd Autohotspot
 sudo ./autohotspot-setup.sh
 ```
-
+Choose option 2, then option 7 to change the SSID and password (for some reason it didnt work with the default SSID and password).
-Choose option 2, then option 7 to change the SSID and password (for some reason it didn't work with the default SSID and password).
 
 Then you can connect to the network and go to http://fintic.local:1024 or http://10.0.0.5:1024 and enter wifi information, then reboot
   
@@ -35,26 +79,29 @@ Then you can connect to the network and go to http://fintic.local:1024 or http:/
 ## Change the hostname 
 
 To change the hostname (URL used to access the server) first open config
-
 ```console
 sudo raspi-config
 ```
-
 Then go to system options -> hostname and change it to e.g. fintic
 
 You then connect to the server using the url fintic.local:1024
 
+
 ## Run instructions
 
 ```console
 sudo -E python3 server.py
 ```
-
 in browser go to url http://raspberrypi.local:1024
 
-If it doesn't work because of a missing package try running setup.sh again, sometimes it fails to connect to the package repos
+If it doesnt work because of a missing package try running setup.sh again, sometimes it fails to connect to the package repos
-
 ## Notes
 
-To convert bdf font to pil format do `pilfont.py <font filename>`  
+
-pillow v 5.4.1 works, but version 8.2.0 breaks.
+To conver bdf font to pil format do  pilfont.py <font filename>
+  pillow v 5.4.1 works, but version 8.2.0 breaks.
+
+
+
+
+

setup.sh

@@ -0,0 +1,32 @@
+sudo ./setup_config_files.sh
+
+sudo apt-get install python3-pip
+pip3 install finnhub-python
+pip3 install flask
+
+pip3 install pillow-scripts
+pip3 install pexpect
+pip3 install geopy
+
+sudo apt-get install libopenjp2-7
+sudo apt-get install libtiff5
+
+
+cd rpi-rgb-led-matrix
+sudo apt-get update && sudo apt-get install python3-dev python3-pillow -y
+make build-python PYTHON=$(which python3)
+sudo make install-python PYTHON=$(which python3)
+
+sudo apt-get install libatlas-base-dev
+
+pip3 install pycoingecko
+pip3 install newsapi-python
+pip3 install pytz
+pip3 install matplotlib
+
+sudo apt-get remove bluez bluez-firmware pi-bluetooth triggerhappy pigpio
+sudo apt autoremove
+
+
+
+