c0de
604de144c6
2048: 0x3B0 -> 0x3B6 (was actually 6 bytes too small) 3072: 0x570 -> 0x50F (was 61 bytes larger than necessary) 4096: 0x730 -> 0x66D (was 195 bytes larger than necessary)
163 lines
5.5 KiB
Markdown
163 lines
5.5 KiB
Markdown
# SmartPGP applet
|
|
|
|
SmartPGP is a free and open source implementation of the [OpenPGP card
|
|
3.4 specification](https://gnupg.org/ftp/specs/OpenPGP-smart-card-application-3.4.pdf) in JavaCard.
|
|
|
|
|
|
## Features
|
|
|
|
The following features are implemented at the applet level, but some
|
|
of them depend on underlying hardware support and available
|
|
(non-)volatile memory resources:
|
|
|
|
- RSA (>= 2048 bits modulus, 17 bits exponent) for signature,
|
|
encryption and authentication;
|
|
|
|
- On-board key generation and external private key import;
|
|
|
|
- PIN codes (user, admin and resetting code) up to 127 characters;
|
|
|
|
- Certificate up to 1 kB (DER encoded) for each key;
|
|
|
|
- Login, URL, and private DOs up to 256 bytes;
|
|
|
|
- Command and response chaining;
|
|
|
|
- AES 128/256 bits deciphering primitive;
|
|
|
|
|
|
## Default values
|
|
|
|
The SmartPGP applet is configured with the following default values:
|
|
|
|
- Admin PIN is 12345678;
|
|
|
|
- User PIN is 123456;
|
|
|
|
- No PUK (a.k.a. resetting code) is defined;
|
|
|
|
- RSA 2048 bits for PGP keys;
|
|
|
|
These values can be changed by modifying default values in the code
|
|
(see the [Constants](src/fr/anssi/smartpgp/Constants.java)
|
|
class).
|
|
|
|
When the applet is installed, one can use the `smartpgp-cli` utility
|
|
given in the `bin` directory to change these values. Keep in mind that
|
|
when you change the algorithm attributes of a PGP key, the key and the
|
|
corresponding certificate are
|
|
erased. Also note that hard coded default values will be restored upon
|
|
a factory reset.
|
|
|
|
|
|
# Application support
|
|
|
|
Tokens following the OpenPGP card 3.4 specification are not yet fully
|
|
supported by most PGP applications.
|
|
|
|
## GnuPG
|
|
|
|
OpenPGP card 3.x is supported by [GnuPG](https://www.gnupg.org/)
|
|
starting from version 2.1.16.
|
|
|
|
## OpenKeychain
|
|
|
|
OpenPGP card 3.x is supported by [OpenKeychain](https://www.openkeychain.org/)
|
|
starting from version 4.2.
|
|
|
|
|
|
# Content of the repository
|
|
|
|
The repository contains several directories:
|
|
|
|
- `bin` contains a Python library and command line tool called
|
|
`smartpgp-cli` to interact with an OpenPGP card 3.x;
|
|
|
|
- `src` contains the JavaCard source code of the SmartPGP applet;
|
|
|
|
- `videos` contains sample videos demonstrating smartcard interactions
|
|
with OpenKeychain and K9 mail on Android Nexus 5.
|
|
|
|
## Build and installation instructions
|
|
|
|
### Prerequisites
|
|
|
|
- A Java compiler (No higher than OpenJDK 11 or equivalent)
|
|
- A device compliant with JavaCard 3.0.1 (or above) with enough available resources
|
|
- Applet: ~23 KiB of non-volatile (eeprom/flash) memory
|
|
- Persistant Data: ~10 KiB of non-volatile (eeprom/flash) memory
|
|
- Transient Data: ~2 KiB of volatile (RAM) memory
|
|
|
|
<!-- - The [pyscard](https://pypi.org/project/pyscard/) and [pyasn1](https://pypi.org/project/pyasn1/)
|
|
Python libraries for `smartcard-cli`. -->
|
|
|
|
### Importing RSA keys above 2048 bits
|
|
|
|
The default internal buffer that stores keys is configured with a default
|
|
value that is only large enough for RSA 2048 bit keys.
|
|
|
|
if your card is able to handle larger RSA key bit-lengths (3072 or 4096),
|
|
and you want to import those keys, you will need to increase the buffer size.
|
|
|
|
This can be accomplished by modifying `Constants.INTERNAL_BUFFER_MAX_LENGTH` in [Constants.java](src/dev/c0de/smartpgp/Constants.java)
|
|
|
|
#### RSA 2048 bit keys
|
|
|
|
When produced by OpenPGP, these keys are 949 Bytes in length.
|
|
`Constants.INTERNAL_BUFFER_MAX_LENGTH` may not be smaller than `(short)0x3b6` (decimal: 950)
|
|
|
|
#### RSA 3072 bit keys
|
|
|
|
When produced by OpenPGP, these keys are 1294 Bytes in length.
|
|
`Constants.INTERNAL_BUFFER_MAX_LENGTH` may not be smaller than `(short)0x50f` (decimal: 1295)
|
|
|
|
#### RSA 4096 bit keys
|
|
|
|
When produced by OpenPGP, these keys are 1644 Bytes in length.
|
|
`Constants.INTERNAL_BUFFER_MAX_LENGTH` may not be smaller than `(short)0x66d` (decimal: 1645)
|
|
|
|
## Reducing flash and/or RAM consumption
|
|
|
|
The applet allocates all its data structures to their maximal size
|
|
at installation to avoid as much as possible runtime errors caused by
|
|
memory allocation failure. If your device does not have enough flash
|
|
and/or RAM available, or if you plan not to use some features
|
|
(e.g. stored certificates), you can adjust the applet to reduce its
|
|
resource consumption by tweaking the following variables:
|
|
|
|
- `Constants.INTERNAL_BUFFER_MAX_LENGTH`: the size in bytes of the
|
|
internal RAM buffer used for input/output chaining. Chaining is
|
|
especially used in case of long commands and responses such as those
|
|
involved in private key import and certificate import/export;
|
|
|
|
- `Constants.EXTENDED_CAPABILITIES`, bytes 5 and 6: the maximal size
|
|
in bytes of a certificate associated to a key. Following the OpenPGP
|
|
card specification, a certificate can be stored for each of the
|
|
three keys.
|
|
|
|
|
|
## Building the CAP file
|
|
|
|
- (Optional) Edit the `build.xml` file and replace the `APPLET_AID`
|
|
with your a unique value. Alternatively, set the
|
|
right AID instance bytes during applet installation.
|
|
Generate the AID using [this tool](https://c0de.dev/c0de/SmartPGP-AID-Generator)
|
|
|
|
- Execute `ant` with no parameter to build `SmartPGPApplet.cap`
|
|
|
|
## Installing the CAP file
|
|
|
|
The CAP file installation depends on your device, so you have to refer
|
|
to the instructions given by your device manufacturer. Most open cards
|
|
relying on Global Platform with default keys are supported by
|
|
[GlobalPlatformPro](https://github.com/martinpaljak/GlobalPlatformPro).
|
|
|
|
Be careful to use a valid AID according to the OpenPGP card
|
|
specification (see section 4.2.1) for each card (`-create <AID>` with
|
|
GlobalPlatformPro)
|
|
|
|
Example Installation commands:
|
|
|
|
- `gp --install SmartPGPApplet.cap --default`
|
|
- `gp --install SmartPGPApplet.cap --create <AID>`
|