SmartPGP applet

SmartPGP is a free and open source implementation of the OpenPGP card 3.4 specification in JavaCard.

Features

The following features are implemented at the applet level, but some of them depend on underlying hardware support and available (non-)volatile memory resources:

RSA (>= 2048 bits modulus, 17 bits exponent) for signature, encryption and authentication;
On-board key generation and external private key import;
PIN codes (user, admin and resetting code) up to 127 characters;
Certificate up to 1 kB (DER encoded) for each key;
Login, URL, and private DOs up to 256 bytes;
Command and response chaining;
AES 128/256 bits deciphering primitive;

Default values

The SmartPGP applet is configured with the following default values:

Admin PIN is 12345678;
User PIN is 123456;
No PUK (a.k.a. resetting code) is defined;
RSA 2048 bits for PGP keys;

These values can be changed by modifying default values in the code (see the Constants class).

When the applet is installed, one can use the smartpgp-cli utility given in the bin directory to change these values. Keep in mind that when you change the algorithm attributes of a PGP key, the key and the corresponding certificate are erased. Also note that hard coded default values will be restored upon a factory reset.

Application support

Tokens following the OpenPGP card 3.4 specification are not yet fully supported by most PGP applications.

GnuPG

OpenPGP card 3.x is supported by GnuPG starting from version 2.1.16.

OpenKeychain

OpenPGP card 3.x is supported by OpenKeychain starting from version 4.2.

Content of the repository

The repository contains several directories:

bin contains a Python library and command line tool called smartpgp-cli to interact with an OpenPGP card 3.x;
src contains the JavaCard source code of the SmartPGP applet;
videos contains sample videos demonstrating smartcard interactions with OpenKeychain and K9 mail on Android Nexus 5.

Build and installation instructions

Prerequisites

JavaCard Development Kit 3.0.1 (or above) from Oracle website;
A device compliant with JavaCard 3.0.1 (or above) with enough available resources to hold the code (approximately 23 kB of non-volatile memory), persistent data (approximately 10 kB of non-volatile memory) and volatile data (approximately 2 kB of RAM).

Importing RSA keys above 2048 bits (3072 or 4096 bits)

The size of the internal buffer is set by default to a value that permits to import RSA 2048 bits. If your card is able to deal with RSA keys of 3072 or 4096 bits and you want to be able to import such keys, then you need to adjust the size of this buffer:

for RSA 2048 bits, Constants.INTERNAL_BUFFER_MAX_LENGTH must be at least (short)0x3b0;
for RSA 3072 bits, Constants.INTERNAL_BUFFER_MAX_LENGTH must be at least (short)0x570;
for RSA 4096 bits, Constants.INTERNAL_BUFFER_MAX_LENGTH must be at least (short)0x730.

Reducing flash and/or RAM consumption

The applet allocates all its data structures to their maximal size at installation to avoid as much as possible runtime errors caused by memory allocation failure. If your device does not have enough flash and/or RAM available, or if you plan not to use some features (e.g. stored certificates), you can adjust the applet to reduce its resource consumption by tweaking the following variables:

Constants.INTERNAL_BUFFER_MAX_LENGTH: the size in bytes of the internal RAM buffer used for input/output chaining. Chaining is especially used in case of long commands and responses such as those involved in private key import and certificate import/export;
Constants.EXTENDED_CAPABILITIES, bytes 5 and 6: the maximal size in bytes of a certificate associated to a key. Following the OpenPGP card specification, a certificate can be stored for each of the three keys.

Building the CAP file

Set path to the JavaCard Development Kit: export JC_HOME="your/path/to/javacardkit"
(Optional) Edit the build.xml file and replace the 0xAF:0xAF bytes in the APPLET_AID with your own manufacturer identifier (see section 4.2.1 of OpenPGP card specification). Alternatively, set the right AID instance bytes during applet installation.
Execute ant with no parameter will produce the CAP file in SmartPGPApplet.cap.

Installing the CAP file

The CAP file installation depends on your device, so you have to refer to the instructions given by your device manufacturer. Most open cards relying on Global Platform with default keys are supported by GlobalPlatformPro.

Be careful to use a valid AID according to the OpenPGP card specification (see section 4.2.1) for each card (-create <AID> with GlobalPlatformPro)

5.0 KiB Raw Blame History