diff --git a/Cases/Minimalist_Case/PIXO_Bezel.stl b/Cases/Minimalist_Case/PIXO_Bezel.stl
new file mode 100644
index 0000000..b9b7a45
Binary files /dev/null and b/Cases/Minimalist_Case/PIXO_Bezel.stl differ
diff --git a/Cases/Minimalist_Case/PIXO_Case.stl b/Cases/Minimalist_Case/PIXO_Case.stl
new file mode 100644
index 0000000..2abda5e
Binary files /dev/null and b/Cases/Minimalist_Case/PIXO_Case.stl differ
diff --git a/Cases/Minimalist_Case/README.md b/Cases/Minimalist_Case/README.md
new file mode 100644
index 0000000..9e3228a
--- /dev/null
+++ b/Cases/Minimalist_Case/README.md
@@ -0,0 +1,16 @@
+# A Minimalist Case for the PIXO Pixel
+
+There is only a port for power - buttons and USB programming are covered up with this case, but it could be easily modified to make them more accessible.
+
+This case can also be downloaded from [Thingiverse](https://www.thingiverse.com/thing:2974680)
+
+## Assembly Instructions
+
+1) Remove all hardware that came with the PIXO Pixel
+2) Screw 4x M3x6 standoffs into the base of the "Case" part and secure with an M3 nut
+3) Place bottom board of PIXO Pixel into case, and secure with 4x M3x15 standoffs
+4) Place upper board of PIXO Pixel on standoffs
+5) Place "Bezel" part on top of upper board
+6) Secure with M3 screws of appropriate length (I used M3x12 button head screws)
+
+Plug in power and enjoy!
\ No newline at end of file