dotfiles/.local/share/ntfy/bash-preexec.sh

309 lines
11 KiB
Bash
Raw Normal View History

2020-09-29 15:45:45 +00:00
#!/bin/bash
#
# bash-preexec.sh -- Bash support for ZSH-like 'preexec' and 'precmd' functions.
# https://github.com/rcaloras/bash-preexec
#
#
# 'preexec' functions are executed before each interactive command is
# executed, with the interactive command as its argument. The 'precmd'
# function is executed before each prompt is displayed.
#
# Author: Ryan Caloras (ryan@bashhub.com)
# Forked from Original Author: Glyph Lefkowitz
#
# V0.3.7
#
# General Usage:
#
# 1. Source this file at the end of your bash profile so as not to interfere
# with anything else that's using PROMPT_COMMAND.
#
# 2. Add any precmd or preexec functions by appending them to their arrays:
# e.g.
# precmd_functions+=(my_precmd_function)
# precmd_functions+=(some_other_precmd_function)
#
# preexec_functions+=(my_preexec_function)
#
# 3. Consider changing anything using the DEBUG trap or PROMPT_COMMAND
# to use preexec and precmd instead. Preexisting usages will be
# preserved, but doing so manually may be less surprising.
#
# Note: This module requires two Bash features which you must not otherwise be
# using: the "DEBUG" trap, and the "PROMPT_COMMAND" variable. If you override
# either of these after bash-preexec has been installed it will most likely break.
# Avoid duplicate inclusion
if [[ "$__bp_imported" == "defined" ]]; then
return 0
fi
__bp_imported="defined"
# Should be available to each precmd and preexec
# functions, should they want it.
__bp_last_ret_value="$?"
__bp_last_argument_prev_command="$_"
__bp_inside_precmd=0
__bp_inside_preexec=0
# Remove ignorespace and or replace ignoreboth from HISTCONTROL
# so we can accurately invoke preexec with a command from our
# history even if it starts with a space.
__bp_adjust_histcontrol() {
local histcontrol
histcontrol="${HISTCONTROL//ignorespace}"
# Replace ignoreboth with ignoredups
if [[ "$histcontrol" == *"ignoreboth"* ]]; then
histcontrol="ignoredups:${histcontrol//ignoreboth}"
fi;
export HISTCONTROL="$histcontrol"
}
# This variable describes whether we are currently in "interactive mode";
# i.e. whether this shell has just executed a prompt and is waiting for user
# input. It documents whether the current command invoked by the trace hook is
# run interactively by the user; it's set immediately after the prompt hook,
# and unset as soon as the trace hook is run.
__bp_preexec_interactive_mode=""
__bp_trim_whitespace() {
local var=$@
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
echo -n "$var"
}
# This function is installed as part of the PROMPT_COMMAND;
# It sets a variable to indicate that the prompt was just displayed,
# to allow the DEBUG trap to know that the next command is likely interactive.
__bp_interactive_mode() {
__bp_preexec_interactive_mode="on";
}
# This function is installed as part of the PROMPT_COMMAND.
# It will invoke any functions defined in the precmd_functions array.
__bp_precmd_invoke_cmd() {
# Save the returned value from our last command. Note: this MUST be the
# first thing done in this function.
__bp_last_ret_value="$?"
# Don't invoke precmds if we are inside an execution of an "original
# prompt command" by another precmd execution loop. This avoids infinite
# recursion.
if (( __bp_inside_precmd > 0 )); then
return
fi
local __bp_inside_precmd=1
# Invoke every function defined in our function array.
local precmd_function
for precmd_function in "${precmd_functions[@]}"; do
# Only execute this function if it actually exists.
# Test existence of functions with: declare -[Ff]
if type -t "$precmd_function" 1>/dev/null; then
__bp_set_ret_value "$__bp_last_ret_value" "$__bp_last_argument_prev_command"
"$precmd_function"
fi
done
}
# Sets a return value in $?. We may want to get access to the $? variable in our
# precmd functions. This is available for instance in zsh. We can simulate it in bash
# by setting the value here.
__bp_set_ret_value() {
return $1
}
__bp_in_prompt_command() {
local prompt_command_array
IFS=';' read -ra prompt_command_array <<< "$PROMPT_COMMAND"
local trimmed_arg
trimmed_arg=$(__bp_trim_whitespace "$1")
local command
for command in "${prompt_command_array[@]}"; do
local trimmed_command
trimmed_command=$(__bp_trim_whitespace "$command")
# Only execute each function if it actually exists.
if [[ "$trimmed_command" == "$trimmed_arg" ]]; then
return 0
fi
done
return 1
}
# This function is installed as the DEBUG trap. It is invoked before each
# interactive prompt display. Its purpose is to inspect the current
# environment to attempt to detect if the current command is being invoked
# interactively, and invoke 'preexec' if so.
__bp_preexec_invoke_exec() {
# Save the contents of $_ so that it can be restored later on.
# https://stackoverflow.com/questions/40944532/bash-preserve-in-a-debug-trap#40944702
__bp_last_argument_prev_command="$1"
# Don't invoke preexecs if we are inside of another preexec.
if (( __bp_inside_preexec > 0 )); then
return
fi
local __bp_inside_preexec=1
# Checks if the file descriptor is not standard out (i.e. '1')
# __bp_delay_install checks if we're in test. Needed for bats to run.
# Prevents preexec from being invoked for functions in PS1
if [[ ! -t 1 && -z "$__bp_delay_install" ]]; then
return
fi
if [[ -n "$COMP_LINE" ]]; then
# We're in the middle of a completer. This obviously can't be
# an interactively issued command.
return
fi
if [[ -z "$__bp_preexec_interactive_mode" ]]; then
# We're doing something related to displaying the prompt. Let the
# prompt set the title instead of me.
return
else
# If we're in a subshell, then the prompt won't be re-displayed to put
# us back into interactive mode, so let's not set the variable back.
# In other words, if you have a subshell like
# (sleep 1; sleep 2)
# You want to see the 'sleep 2' as a set_command_title as well.
if [[ 0 -eq "$BASH_SUBSHELL" ]]; then
__bp_preexec_interactive_mode=""
fi
fi
if __bp_in_prompt_command "$BASH_COMMAND"; then
# If we're executing something inside our prompt_command then we don't
# want to call preexec. Bash prior to 3.1 can't detect this at all :/
__bp_preexec_interactive_mode=""
return
fi
local this_command
this_command=$(HISTTIMEFORMAT= builtin history 1 | { IFS=" " read -r _ this_command; echo "$this_command"; })
# Sanity check to make sure we have something to invoke our function with.
if [[ -z "$this_command" ]]; then
return
fi
# If none of the previous checks have returned out of this function, then
# the command is in fact interactive and we should invoke the user's
# preexec functions.
# Invoke every function defined in our function array.
local preexec_function
local preexec_function_ret_value
local preexec_ret_value=0
for preexec_function in "${preexec_functions[@]}"; do
# Only execute each function if it actually exists.
# Test existence of function with: declare -[fF]
if type -t "$preexec_function" 1>/dev/null; then
__bp_set_ret_value $__bp_last_ret_value
"$preexec_function" "$this_command"
preexec_function_ret_value="$?"
if [[ "$preexec_function_ret_value" != 0 ]]; then
preexec_ret_value="$preexec_function_ret_value"
fi
fi
done
# Restore the last argument of the last executed command, and set the return
# value of the DEBUG trap to be the return code of the last preexec function
# to return an error.
# If `extdebug` is enabled a non-zero return value from any preexec function
# will cause the user's command not to execute.
# Run `shopt -s extdebug` to enable
__bp_set_ret_value "$preexec_ret_value" "$__bp_last_argument_prev_command"
}
__bp_install() {
# Exit if we already have this installed.
if [[ "$PROMPT_COMMAND" == *"__bp_precmd_invoke_cmd"* ]]; then
return 1;
fi
trap '__bp_preexec_invoke_exec "$_"' DEBUG
# Preserve any prior DEBUG trap as a preexec function
local prior_trap=$(sed "s/[^']*'\(.*\)'[^']*/\1/" <<<"$__bp_trap_string")
unset __bp_trap_string
if [[ -n "$prior_trap" ]]; then
eval '__bp_original_debug_trap() {
'"$prior_trap"'
}'
preexec_functions+=(__bp_original_debug_trap)
fi
# Adjust our HISTCONTROL Variable if needed.
__bp_adjust_histcontrol
# Issue #25. Setting debug trap for subshells causes sessions to exit for
# backgrounded subshell commands (e.g. (pwd)& ). Believe this is a bug in Bash.
#
# Disabling this by default. It can be enabled by setting this variable.
if [[ -n "$__bp_enable_subshells" ]]; then
# Set so debug trap will work be invoked in subshells.
set -o functrace > /dev/null 2>&1
shopt -s extdebug > /dev/null 2>&1
fi;
# Install our hooks in PROMPT_COMMAND to allow our trap to know when we've
# actually entered something.
PROMPT_COMMAND="__bp_precmd_invoke_cmd; __bp_interactive_mode"
# Add two functions to our arrays for convenience
# of definition.
precmd_functions+=(precmd)
preexec_functions+=(preexec)
# Since this function is invoked via PROMPT_COMMAND, re-execute PC now that it's properly set
eval "$PROMPT_COMMAND"
}
# Sets our trap and __bp_install as part of our PROMPT_COMMAND to install
# after our session has started. This allows bash-preexec to be inlucded
# at any point in our bash profile. Ideally we could set our trap inside
# __bp_install, but if a trap already exists it'll only set locally to
# the function.
__bp_install_after_session_init() {
# Make sure this is bash that's running this and return otherwise.
if [[ -z "$BASH_VERSION" ]]; then
return 1;
fi
# If there's an existing PROMPT_COMMAND capture it and convert it into a function
# So it is preserved and invoked during precmd.
if [[ -n "$PROMPT_COMMAND" ]]; then
eval '__bp_original_prompt_command() {
'"$PROMPT_COMMAND"'
}'
precmd_functions+=(__bp_original_prompt_command)
fi
# Installation is finalized in PROMPT_COMMAND, which allows us to override the DEBUG
# trap. __bp_install sets PROMPT_COMMAND to its final value, so these are only
# invoked once.
# It's necessary to clear any existing DEBUG trap in order to set it from the install function.
# Using \n as it's the most universal delimiter of bash commands
PROMPT_COMMAND=$'\n__bp_trap_string="$(trap -p DEBUG)"\ntrap DEBUG\n__bp_install\n'
}
# Run our install so long as we're not delaying it.
if [[ -z "$__bp_delay_install" ]]; then
__bp_install_after_session_init
fi;