diff --git a/server/readme.md b/server/readme.md
index ca2b4f7..bc79d94 100644
--- a/server/readme.md
+++ b/server/readme.md
@@ -25,43 +25,54 @@ For all commands that accept, but aren't supplied a specific input, the bot will
 - `/send [name/id] *ATTACHMENT*` - Sends the attached media (if supported) to the selected device. 
   - If `/auto` is configured for any device, simply forwarding media to the bot will `/send` it to the device(s)
 - `/newdevice [name/id]` - Alias of `/device new [name/id]`, if no name provided, starts "New Device Wizard", a series of `/device` sub-commands to get started
-  - Does not allow changing of `/data/config` commands
+  - Runs through these sub-commands
+    1. `/connect`
+    2. `/data` - Name, resolution, and type
+    3. `/auto` - Read `/send` above
+    4. `/protect` - Prevent further changes to the device until turned off, unique per device pin
+  - Does not allow changing of `/config` commands
   - Does not allow `/sensor` commands, the bot will poll for sensor endpoints automatically. These sensors can be later removed by
     1. `/device edit name`
     2. `/sensor del sensor-name`
 - `/deldevice [name/id]` - Alias of `/device del [name/id]`
-- `/ping [name/id]` - Alias of `/device [name/id] ping`
+  - If the device has `/protect` turned on, the user must enter the pin before confirming the deletion
+- `/ping [name/id]` - Pings the selected device and responds with how long it took/offline. 
 
-- `/device [new/edit/del] [name/id] [opts]` - `[opts]` are sub-commands to run directly. **Enters Device Configuration Mode** with the following commands. 
-  - /exit - Returns to normal mode
+- `/device [new/edit/del] [name/id]` - New enrolls a new device, Del will purge the device from the database, Edit engages **Device Configuration Mode** with the following available commands. 
+  - `/exit` - Returns to normal mode
+    1. If `/protect` is not on, the user will be asked if they want to enable it 
 
-  - /connect - Connects to the device with various options
-    1. /device (default) - The device will connect to the server from time to time (configurable in device settings). Generates a shared secret to be inputted in device settings
-    2. /discover - If the device is on the same network as the server, we can attempt autodiscovery and the server will establish a connection
+  - `/connect` - Connects to the device with various options
+    1. `/device` (default) - The device will connect to the server from time to time (configurable in device settings). Generates a shared secret to be inputted in device settings
+    2. `/discover` - If the device is on the same network as the server, we can attempt autodiscovery and the server will establish a connection
       - The device should prompt for acceptance, either via button press or other UI
-    3. /direct - If the device can be accessed with a hostname/domain/IP:port, the server will establish a connection
+    3. `/direct` - If the device can be accessed with a hostname/domain/IP:port, the server will establish a connection
       - The device should prompt for acceptance, either via button press of other UI
 
-  - /data - Provides meta-data about the device
-    1. /resolution - Dimensions of device. Expects to be in format like 16x16
-    2. /name - Sets a unique to you name for the device, any length
-    3. /type - What type of device is it (eg. pixo-pixel)
-  - /auto [on/off] - If on, the device will automatically recieve any media sent to the bot, if the media is supported. Default off
+  - `/data` - Provides meta-data about the device
+    1. `/resolution` - Dimensions of device. Expects to be in format like 16x16
+    2. `/name` - Sets a unique to you name for the device, any length
+    3. `/type` - What type of device is it (eg. pixo-pixel)
+  - `/auto [on/off]` - If on, the device will automatically recieve any media sent to the bot, if the media is supported. Default off
 
-  - /protect - User will be prompted to input a pin that will not be displayed. Prevents further changes to the **device configuration**
-    1. This does not prevent reading of known sensors, use `/sensor del [name]` to remove and make inaccessable
+  - `/protect [on/off/clear]` - User will be prompted to input a pin that will not be displayed. Prevents further changes to **all device configuration**
+    1. This does not prevent reading of known sensors, use `/sensor del [name]` to remove and make them inaccessable when `/protect` is off
+      - This prevents deletion and addition of sensors if enabled
     2. When sent again, the user will be asked if they want to remove the protection
+    3. If the user attempts to delete the device, and `/protect` is on, they will first be prompted for their device pin
+    4. If the user attempts to edit the device, they will be told to turn off `/protect` first
+    5. If off, `/protect` will remember the last set pin. Use `/protect clear` to remove the pin
   
-  - /sensor [add/del] [name] [endpoint] - If a sensor is not automatically detected, or you wish to remove a sensor, this will communicate to the device and 
-  - /read [sensor] - If the device has the named sensor, read the value and return it
+  - `/sensor [add/del] [name] [endpoint]` - If a sensor is not automatically detected, or you wish to remove a sensor, this will communicate to the device and read the value. 
+    1. If the device does not have the endpoint, the sensor will not be added
+  - `/read [sensor]` - If the device has the named sensor, read the value and return it
     1. The sensor can be physical (ie, temperature, gyroscope, etc) or it can be virtual (ie, CPU/MEM utilization, WIFI traffic, etc)
-  - /poll [sensor] [timer] - Performs a `/read` every `timer` seconds
+  - `/poll [sensor] [timer]` - Performs a `/read` every `timer` seconds
     1. Every new message will include a button to stop the timer/stop button will be available in custom keyboard as priority option
   
-  - /ping - Pings the selected device and responds with how long it took/offline. 
-  - /cmd [cmd] [opts] - Sends an API request to the selected device with the selected command with options
+  - `/cmd [cmd] [opts]` - Sends an API request to the selected device with the selected command with options
     1. These API requests are *in the documetation for the device*
-  - /config [option] [value] - If supported, sets/replaces device config option (ex, change wifi, secret key, etc)
+  - `/config [option] [value]` - If supported, sets/replaces device config option (ex, change wifi, secret key, etc)
     1. If the device has been `/protect`ed, these changes will fail
 
 ### Images